Sunday, September 19, 2010

Spray Bottle Scan with Improved Hardware

Attached you can see the scan of spray bottle  .. Total 9 scans , each scan cycle took 2minutes.. Approximate height of the spray bottle is 250mm and 80mm in diameter...

The alignment and stitching was a difficult part due to symmetry in the model.. However, i learn a lot in stitching the scans... The results are attached...

Improved Laser Scanner Setup

It took a lot of time and patience to make the hardware of my laser scanner setup in such a way that:
1- It can easily perform the scanning without calibration panel.
2- It can be easily disassembled and assembled in new location.
3-Compact in size for transportation
4- Aesthetically look beautiful
5- Electronics have all the control features
6- The complete setup is light weight.
7- Accurate and reliable 
After, considering all above and lot more i was able to DIY the hardware and made the first test scan.. Attached are the pictures of my improved Hardware..