Friday, December 17, 2010

Fish Platter


A long time ago i cut the Fish bowl i am sharing here
For 12mm deep Pocket operation I used 1" Barley Twist Tool, for Profile cut i used 6.5mm endmill and V-carving was done by 12.5mm 90 degree V-bit...





The Platter Length is 610mm and width 250mm and the thickness 16mm.... TOTAL TIME 45Minutes with toolchange...

2 comments:

  1. Very interesting. I work for a shopfitting company with a BIESSE Rover CNC Router. We are currently looking for new things to cnc.. Will deffo keep coming back to see your new designs.
    Keep it up!
    Will - Tribune Shopfitters
    www.tribune.uk.com

    ReplyDelete
  2. Hi. That platter is awesome. Any chance of sharing the DXF?

    ReplyDelete