Saturday, April 17, 2010

Embroidery Gcode Generator V2.4.4

Recently, I have made drastic changes in embroidery software... These changes were necessary to make optimum Gcode for embroidery work...
Previously, I have made the Gcode that took 30minutes, now the same Gcode is effiecient and takes 16minutes on the embroidery machine... I have added functionalities to move both hoop as well as Needle when the the needle is above the cloth..this saves 40% of embroidery time... I have also added 'Machine Setting' dialogue for the users that will help them for setting Z-axis (sewing Wheel) values in Mach3 software..
You can see the attached figures by clicking on them..


19 comments:

  1. Khalid,

    Nice work!

    I believe your software is the first to do g-code/embroidery!

    Switcher,

    ReplyDelete
  2. Hi Switcher,
    Thanks for posting the comments.. I wish this software may become the first embroidery software for our CNC world...

    Alex_us:
    Thank you very much.. I will keep posting and i hope you will keep watching my posts and commenting on them ;)

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  3. Very cool software, Khalid. I just put a note about it on CNCCookbook.

    Best Regards,

    Bob Warfield
    www.cnccookbook.com

    ReplyDelete
  4. good code. i 'm still at the first steps of gcode embroiding - i attached a stepper to my old sewing machine. i have the question - where are he formats of pfaff, husqvarna, janome files documented so that they could be converted to gcode.
    kind regards
    peter, germany

    ReplyDelete
  5. Geat job! Can you give me a permit to use or try your software?
    Can you give me a link for download?
    Tank you very much!

    ReplyDelete
  6. hi!
    Did you planed to release your software as opensource.
    I would like to make diy emboidery machine but i'm looking for software.
    thank you.

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. i want develop more, can you sale source code for me?

    ReplyDelete
  9. hi,
    can one give me a tip how to start the Embroidery gcode generator? i have windows 10 and i installed .net, but no chance?
    Many thanks for replay

    ReplyDelete
  10. where can i download your software please need help for research purposes

    ReplyDelete
  11. can the embrodery g code generator work on Windows 10 64 bit, thank you

    ReplyDelete
  12. Hello, I also tried to install on Windows 7 32 bit, but the software can't be used, there is a message "run time error" thanks

    ReplyDelete
  13. complimenti e bravo . posso provare il tuo software ?
    grazie

    ReplyDelete
  14. It’s very informative and you are obviously very knowledgeable in this area. You have opened my eyes to varying views on this topic with interesting and solid content. best generator for travel trailer

    ReplyDelete
  15. I am impressed by the information that you have on this blog. It shows how well you understand this subject. best generator for travel trailer

    ReplyDelete